120 m / min Feeding Speed Radiator Fin Forming Machine
Product introduction:
Place of production :china
Feeding speed: 120 m / min
Number of pieces processed at the same time: 1 piece
Thickness of aluminum foil: 0.04 ~ 0.30mm
Total power: 4.5-7.5kw
Equipment air source pressure: 0.6MPa
Total weight of equipment: 1.8 tons
Fin forming tool (hob):
- Divided into fin materials according to the tool processing:
Aluminum fin forming tool, copper fin forming tool, stainless steel
forming tool
- According to the shape of the fin rolled by the cutter roll, it is
divided into:
U-shaped arc fin forming tool, V-shaped arc fin forming tool, flat
top fin forming tool, staggered fin forming tool
- According to the shape of the fin window rolled out by the cutter
roll, it is divided into:
Open shutter fin forming tool, non-open shutter fin forming tool
Dimples, perforated fin forming tools, non-opening ribbed fin
forming tools
About us:
Our company has been engaged in the manufacture and development of
automobile radiator condenser products for more than 15 years. Most
of the products are sold to all countries and regions in the world,
and have accumulated rich production experience.Our company is good
at manufacturing all the process of the radiator tank production
line.In recent years,many companies from other countries in the
same industry also bought the CKD from us and purchased the machine
equipment from us as well.
At the same time, our company provides customers with all kinds of
radiator, condenser required hardware and plastic components.
Ensure the supply and quality of finished products.
If you are interested in setting up a radiator factory in your
place or buying any products , please contact us and we will
provide you with the best service and best price.
FAQ:
1.Does it can change the hob?
The hob is changeable,but the main console is the same,the position
where the hob installed must match with the main console.
2.Does one hob can have multiple fin sizes with different heights?
No,one set of hob only can produce single height of one fin,up and
down fine-tuning height is not more than 0.1mm.
3.Does the hob can have multiple fins with different width?
Yes,it does.One set of hob can be single width of fin,also can
combine different width size of fins,most can combine 10 different
width size of fin in one set of hob.
4.Does one hob can have multiple fin sizes with different heights?
No,one set of hob only can produce single height of one fin,up and
down fine-tuning height is not more than 0.1mm.
