High Quality Lining Materials Aluminum Brazing Furnace For Brazing
Core 575℃~650℃ in the Brazing Area
Product introduction of Aluminum Brazing Furnace:
Controlled atmosphere aluminum brazing furnace system, mainly used
for aluminum radiator, oil cooler, inter-cooler, heater, tube-fin
condenser,the evaporator, parallel flow condenser, laminated
evaporator, power station air cooler and other aluminum work-piece
products that can continuously brazed in a nitrogen atmosphere.
Controlled atmosphere aluminum furnace system includes:
Spray zone, drying zone, brazing zone, cooling zone, central
centralized control cabinet group and other parts,etc.
The brazing zone includes preheating chamber, heating chamber,
retarded cooling chamber and air cooling chamber, etc.
Product features of Aluminum Brazing Furnace:
1.Adopting the patented energy-saving technology that developed
independently by our company, the nitrogen usage amount and total
power of the equipment can be reduced by 40%-50% compared with
similar products
2.Setting up the device of Spray zone is simple and is easy to use
as well.The nozzle can ensure that the flux of brazing parts spray
sufficient and uniform;The air blower ensures that the excess flux
sprayed on the brazed parts is blown off clean.
3.The heating power of drying zone is strong and has high
circulation wind speed in the furnace so that can ensure the
work-piece into the brazing furnace dry thoroughly without residual
moisture.
Product parameters of Aluminum Brazing Furnace:
| Design power | 240KW±10% |
| Normal operating temperature | 600～650℃ |
| Furnace temperature uniformity | ±3℃ |
| maximum service temperature | 700℃ |
| effective working size | 1000mm(Mesh belt width)×250mm(Height of mesh belt) |
| The channel size | 1050mm×300mm(Straight edge height) |
| Temperature control zone | 6 points in Section 6 of Section 3 (temperature measurement) |
| Temperature measuring point layout | The upper and lower of each section + furnace temperature
measurement |
| Mesh belt operating surface height | 900mm |
| Temperature control mode | PID,The work pressure regulating |
| heating mode | resistance wire |
| length of heating zone | 8M |
| conveying chain | SUS316L,Wire Φ 3 mm, wear silk Φ 3.5 mm |
About us:
Our company has been engaged in the manufacture and development of
automobile radiator condenser products for more than 15 years. In
recent years,many companies from other countries in the same
industry also bought the CKD from us and purchased the machine
equipment from us as well.
At the same time, our company provides customers with all kinds of
radiator, condenser required hardware and plastic components.
Ensure the supply and quality of finished products.
If you are interested in setting up a radiator factory in your
place or buying any products , please contact us and we will
provide you with the best service and best price.
FAQ:
1.Does the aluminum Brazing furnace machine is customized or
standard size?
The aluminum Brazing furnace machine is customized by customers
according to their respective capacity requirements and product
series specifications.
2.How to know what kinds of specifications of the aluminium brazing
furnace machine should be customized?
The customers provide the productions plan ,the biggest size of the
core and the dimensions of the production workshop.The engineer
will give the best cost-effective solution according to the
information provided.
3.What’s the style of spray of the aluminum Brazing furnace
machine?
The spray of the aluminum Brazing furnace machine can be divided
into dry electrostatic powder spray style and aqueous solution
spray style.
